Whitworth Stripe curtains in pink blush and grey in a stripe design. Simple, classic pattern.
The Whitworth Stripe curtains collection from Fusion features a modern, clean vertical stripe multi colour design. These 100% cotton eyelet header curtains are fully lined and ready to hang.
The Whitworth Stripe ready made curtains features a modern, clean vertical stripe multi colour design. Fully lined and ready to hang.
2 panels per pack – 10 brushed silver eyelet rings (40mm diameter) per curtain panel
Fabric: 100% Cotton – Lining: 52% Polyester, 48% Cotton (Light Filtering) – Care: 40⁰ Wash, iron on low. Hang to dry only, not suitable for dry cleaning
Matching cushion covers available.
How to Measure
Step 1: Fit the curtain pole before taking measurements
Our eyelet curtains can only be fitted onto a curtain pole (max 35mm diameter)
If there is no curtain currently in place, then one should be fitted first and positioned around the following dimensions.
· 15cm (6 inches) above the window top
· 15-20cm (6-8 inches) either side of the window edges
Step 2: Measure the total width of the curtain pole
Don’t measure between the window edges
Exclude the decorative finials / ball ends
Follow the steps below to select the right panel size for your window.
Step 3: Use the guide below to select the best width of curtain to buy
Our curtains come in pairs and are available in 3 pre-set individual panel width sizes
Pole width 35” to 63” (90cm to 160cm) – Choose curtain size (46”) 117cms Width
Pole width 55” to 87” (140cm to 220cm) – Choose curtain size (66”) 167cms Width
Pole width 70” to 118” (180cm to 300cm) Choose curtain size (90”) 229cms Width
Step 4: To select the required drop (length) of curtain
Last step is to determine the length / drop of the curtain from the pole.
Please measure from the top of the pole to where the curtain should drop to:
1) Pole to window ledge – Measure to the bottom of the window ledge and add 2-4” (5 to 10cm)
2) Pole to radiator – Measure to the top of the radiator and add 2” (5cm)
3) Pole to floor – Measure to 1” (3cm) above the floor to allow for ease of cleaning the floor.